Data Processing Agreement

This Data Processing Agreement (“DPA”) is an addendum to the Customer Terms of Service (“Agreement”) between Daisytuner GmbH (“Daisytuner”) and the Customer. All capitalized terms not defined in this DPA shall have the meanings set forth in the Agreement. Customer enters into this DPA on behalf of itself and, to the extent required under Data Protection Laws, in the name and on behalf of its Authorized Affiliates (defined below).

The parties agree as follows:

1. Definitions

“Affiliate” means an entity that directly or indirectly Controls, is Controlled by or is under common Control with an entity.

“Authorized” Affiliate means any of Customer Affiliate(s) permitted to or otherwise receiving the benefit of the Services pursuant to the Agreement.

“Control” means an ownership, voting or similar interest representing fifty percent (50%) or more of the total interests then outstanding of the entity in question. The term “Controlled” shall be construed accordingly.

“Controller” means an entity that determines the purposes and means of the processing of Personal Data.

“Customer” Data means any data that Daisytuner and/or its Affiliates processes on behalf of Customer in the course of providing the Services under the Agreement.

“Data” Protection Laws means all data protection and privacy laws and regulations applicable to the processing of Personal Data under the Agreement, including, where applicable, EU Data Protection Law.

“EU” Data Protection Law means (i) Regulation 2016/679 of the European Parliament and of the Council on the protection of natural persons with regard to the processing of Personal Data and on the free movement of such data (General Data Protection Regulation) (“GDPR”); and (ii) Directive 2002/58/EC concerning the processing of Personal Data and the protection of privacy in the electronic communications sector and applicable national implementations of it (in each case, as may be amended, superseded or replaced).

“Personal” Data means any Customer Data relating to an identified or identifiable natural person to the extent that such information is protected as personal data under applicable Data Protection Law.

“Privacy” Shield means the EU-US and Swiss-US Privacy Shield Frameworks, as administered by the U.S. Department of Commerce.

“Privacy” Shield Principles means the Privacy Shield Framework Principles (as supplemented by the Supplemental Principles) contained in Annex II to the European Commission Decision of 12 July 2016 pursuant to the Directive, details of which can be found at www.privacyshield.gov/eu-us-framework.

“Processor” means an entity that processes Personal Data on behalf of the Controller.

“Processing” has the meaning given to it in the GDPR and “process”, “processes” and “processed” shall be interpreted accordingly.

“Security” Incident means any unauthorized or unlawful breach of security that leads to the accidental or unlawful destruction, loss, alteration, unauthorized disclosure of or access to Personal Data.

“Services” means any product or service provided by Daisytuner to Customer pursuant to and as more particularly described in the Agreement.

“Standard” Contractual Clauses means the standard contractual clauses issued pursuant to the European Commission Decision of February 5, 2010 on standard contractual clauses for the transfer of personal data to processors established in third countries under Directive 95/46/EC.

“Sub-processor” means any Processor engaged by Daisytuner or its Affiliates to assist in fulfilling its obligations with respect to providing the Services pursuant to the Agreement or this DPA. Sub-processors may include third parties or any Daisytuner Affiliate.

2. Scope and Applicability of this DPA

2.1 This DPA applies where and only to the extent that Daisytuner processes Personal Data on behalf of the Customer in the course of providing the Services and such Personal Data is subject to Data Protection Laws of the European Union, the European Economic Area and/or their member states, Switzerland and/or the United Kingdom. The parties agree to comply with the terms and conditions in this DPA in connection with such Personal Data.

2.2 Role of the Parties. As between Daisytuner and Customer, Customer is the Controller of Personal Data and Daisytuner shall process Personal Data only as a Processor on behalf of Customer. Nothing in the Agreement or this DPA shall prevent Daisytuner from using or sharing any data that Daisytuner would otherwise collect and process independently of Customer’s use of the Services.

2.3 Customer Obligations. Customer agrees that (i) it shall comply with its obligations as a Controller under Data Protection Laws in respect of its processing of Personal Data and any processing instructions it issues to Daisytuner; and (ii) it has provided notice and obtained (or shall obtain) all consents and rights necessary under Data Protection Laws for Daisytuner to process Personal Data and provide the Services pursuant to the Agreement and this DPA.

2.4 Daisytuner Processing of Personal Data. As a Processor, Daisytuner shall process Personal Data only for the following purposes: (i) processing to perform the Services in accordance with the Agreement; (ii) processing to perform any steps necessary for the performance of the Agreement; and (iii) to comply with other reasonable instructions provided by Customer to the extent they are consistent with the terms of this Agreement and only in accordance with Customer’s documented lawful instructions. The parties agree that this DPA and the Agreement set out the Customer’s complete and final instructions to Daisytuner in relation to the processing of Personal Data and processing outside the scope of these instructions (if any) shall require prior written agreement between Customer and Daisytuner.

2.5 Nature of the Data. Daisytuner handles Customer Data provided by Customer. Such Customer Data may contain special categories of data depending on how the Services are used by Customer. The Customer Data may be subject to the following process activities: (i) storage and other processing necessary to provide, maintain and improve the Services provided to Customer; (ii) to provide customer and technical support to Customer; and (iii) disclosures as required by law or otherwise set forth in the Agreement.

2.6 Daisytuner Data. Notwithstanding anything to the contrary in the Agreement (including this DPA), Customer acknowledges that Daisytuner shall have a right to use and disclose data relating to and/or obtained in connection with the operation, support and/or use of the Services for its legitimate business purposes, such as billing, account management, technical support, product development and sales and marketing. To the extent any such data is considered personal data under Data Protection Laws, Daisytuner shall process such data in compliance with Data Protection Laws.

3. Subprocessing

3.1 Authorized Sub-processors. Customer agrees that Daisytuner may engage Sub-processors to process Personal Data on Customer’s behalf. The list of Sub-processors can be found in the ToS.

3.2 Sub-processor Obligations. Daisytuner shall: (i) enter into a written agreement with the Sub-processor imposing data protection terms that require the Sub-processor to protect the Personal Data to the standard required by Data Protection Laws; and (ii) remain responsible for its compliance with the obligations of this DPA and for any acts or omissions of the Sub-processor that cause Daisytuner to breach any of its obligations under this DPA.

3.3 Changes to Sub-processors. Daisytuner shall provide Customer reasonable advance notice (for which email shall suffice) if it adds or removes Sub-processors.

3.4 Objection to Sub-processors. Customer may object in writing to Daisytuner’s appointment of a new Sub-processor on reasonable grounds relating to data protection by notifying Daisytuner promptly in writing within five (5) calendar days of receipt of Daisytuner’s notice in accordance with Section 3.3. Such notice shall explain the reasonable grounds for the objection. In such event, the parties shall discuss such concerns in good faith with a view to achieving commercially reasonable resolution. If this is not possible, either party may terminate the applicable Services that cannot be provided by Daisytuner without the use of the objected-to-new Sub-processor.

4. Security

4.1 Security Measures. Daisytuner shall implement and maintain appropriate technical and organizational security measures to protect Personal Data from Security Incidents and to preserve the security and confidentiality of the Personal Data.

4.2 Confidentiality of Processing. Daisytuner shall ensure that any person who is authorized by Daisytuner to process Personal Data (including its staff, agents and subcontractors) shall be under an appropriate obligation of confidentiality (whether a contractual or statutory duty).

4.3 Security Incident Response. Upon becoming aware of a Security Incident, Daisytuner shall notify Customer without undue delay and shall provide timely information relating to the Security Incident as it becomes known or as is reasonably requested by Customer.

4.4 Updates to Security Measures. Customer acknowledges that the Security Measures are subject to technical progress and development and that Daisytuner may update or modify the Security Measures from time to time provided that such updates and modifications do not result in the degradation of the overall security of the Services purchased by the Customer.

5. Security Reports and Audits

5.1 Daisytuner shall maintain records of its security standards. Upon Customer’s written request, Daisytuner shall provide (on a confidential basis) audit report summaries and/or other documentation reasonably required by Customer to verify Daisytuner’s compliance with this DPA. Daisytuner shall further provide written responses (on a confidential basis) to all reasonable requests for information made by Customer, including responses to information security and audit questionnaires, that Customer (acting reasonably) considers necessary to confirm Daisytuner’s compliance with this DPA, provided that Customer shall not exercise this right more than once per year.

5.2 To the extent the Standard Contractual Clauses apply and the Customer reasonably argues and establishes that the above documentation and/or other third party audit reports are not sufficient to demonstrate compliance with the obligations laid down in this DPA, the Customer may execute an audit as outlined under Clause 5 lit.f) of the Standard Contractual Clauses accordingly, provided that in such an event, the parties agree: (a) Customer is responsible for all costs and fees relating to such audit (including for time, cost and materials expended by Daisytuner); (b) a third party auditor must be mutually agreed upon between the parties to follow industry standard and appropriate audit procedures; (c) such audit must not unreasonably interfere with Daisytuner’s business activities and must be reasonable in time and scope; and (d) the parties must agree to a specific audit plan prior to any such audit, which must be negotiated in good faith between the parties. For avoidance of doubt, nothing in this Section 5.2 modifies or varies the Standard Contractual Clauses, and to the extent a competent authority finds otherwise or any portion of Section 5.2 is otherwise prohibited, unenforceable or inappropriate in view of the Standard Contractual Clauses, the relevant portion shall be severed and the remaining provisions hereof shall not be affected.

6. International Transfers

6.1 Processing Locations. The Processor may not transfer or authorize the transfer of Data to countries outside the EU and/or the European Economic Area (EEA) without the prior written consent of Controller. If personal data processed under this Agreement is transferred from a country within the European Economic Area to a country outside the European Economic Area, the Parties shall ensure that the personal data are adequately protected. To achieve this, the Parties shall, unless agreed otherwise, rely on EU approved standard contractual clauses for the transfer of personal data.

6.2 Transfer Mechanism: Notwithstanding Section 6.1, to the extent Daisytuner processes or transfers (directly or via onward transfer) Personal Data under this DPA from the European Union, the European Economic Area and/or their member states and Switzerland (“EU Data”) in or to countries which do not ensure an adequate level of data protection within the meaning of applicable Data Protection Laws of the foregoing territories, the parties agree that Daisytuner shall be deemed to provide appropriate safeguards for such data by virtue of: (a) having certified its compliance with the Privacy Shield and processing such data in compliance with the Privacy Shield Principles; (b) Daisytuner having reasonably provided other appropriate safeguards under the Data Protection Laws of the foregoing territories; or (c) only if and to the extent neither 6.2(a) nor 6.2(b) are sufficiently appropriate under the Data Protection Laws of the foregoing territories.

7. Return or Deletion of Data

7.1 Upon deactivation of the Services, all Personal Data shall be deleted, save that this requirement shall not apply to the extent Daisytuner is required by applicable law to retain some or all of the Personal Data, or to Personal Data it has archived on back-up systems, which such Personal Data Daisytuner shall securely isolate and protect from any further processing, except to the extent required by applicable law.

8. Cooperation

8.1 To the extent that Customer is unable to independently access the relevant Personal Data within the Services, Daisytuner shall (at Customer’s expense) taking into account the nature of the processing, provide reasonable cooperation to assist Customer by appropriate technical and organizational measures, in so far as is possible, to respond to any requests from individuals or applicable data protection authorities relating to the processing of Personal Data under the Agreement. In the event that any such request is made directly to Daisytuner, Daisytuner shall not respond to such communication directly without Customer’s prior authorization, unless legally compelled to do so. If Daisytuner is required to respond to such a request, Daisytuner shall promptly notify Customer and provide it with a copy of the request unless legally prohibited from doing so.

8.2 To the extent Daisytuner is required under Data Protection Law, Daisytuner shall (at Customer’s expense) provide reasonably requested information regarding Daisytuner’s processing of Personal Data under the Agreement to enable the Customer to carry out data protection impact assessments or prior consultations with data protection authorities as required by law.

9. Miscellaneous

9.1 Except for the changes made by this DPA, the Agreement remains unchanged and in full force and effect. If there is any conflict between this DPA and the Agreement, this DPA shall prevail to the extent of that conflict.

9.2 This DPA is a part of and incorporated into the Agreement so references to “Agreement” in the Agreement shall include this DPA.

9.3 In no event shall any party limit its liability with respect to any individual’s data protection rights under this DPA or otherwise.

9.4 This DPA shall be governed by and construed in accordance with governing law and jurisdiction provisions in the Agreement, unless required otherwise by Data Protection Laws.